Learn how to...
If you want to learn how to build a wheel please Click Here.

If you would like a book on how to build a wheel please Click Here.
  Axle Clip Parts


Items sold seperately
  Axle Clip
An original style clip used to hold the axle cap to the axle. Bendable. Determine length as indicate in drawing. Specify length when ordering.
Sold by the each.

  Size Price Part Number
  3" $2.40 00282
  3" $2.40 00315
  3 1/2" $2.40 00316
  4" $2.40 00317
  4 1/2" $2.40 00318
  5" $2.40 00319
  5 1/2" $2.40 00320
  6" $2.40 00321
  7" $2.40 00322

  Perch Clip

  Size Price Part Number
  3 1/2" $2.40 00610
  4" Forged $2.40 00323
  4 1/2" Forged $2.40 00324

  Spring Clip - 1/2 Round

  Size Price Part Number
  6" Forged $2.40 00325
  6 1/2" Forged $2.40 00326
  7" Forged $2.40 00327

  Axle Clip Bar
An under-iron used with the above clips or most originals. Size required is determined by the width of the axle.
Sold by the each.

  Size Price Part Number
  1" X 1/4" X 3/4" $0.60 00328
  1 1/8" X 1/4" X 3/4" $0.60 00329
  1 1/4" X 1/4" X 3/4" $0.60 00330
  1 1/2" X 1/4" X 3/4" $0.60 00331


  Buggy Steps

  Original Style, cast iron step with a 6 1/2" drop and a 4-1/2" diameter star tread. Suitable for most buggys and some carriages.
Sold by the each.

Note:Other styles and sizes of steps available on a special order basis.

  Size Price Part Number
  Buggy - 6 1/2" drop $17.35 00332
  Axle $15.75 00332
  Single Surrey $16.00 00332
  Double Surrey $24.85 00332
  Wagon - Square 7" Drop $21.45 00332


  Body Brace (Bolster)

  A strong, cast iron bracket used as the rear support on a light spring wagon with a 3/4" thick x 8" or 12" high side panel. Copied from an original.
Sold by the each.

  Size Price Part Number
  8" high $23.85 00333
  12" high $28.75 00334


  Brake Lever Assembly

  Style after the originals. Complete brake assembly including, activating lever, mount, saw tooth lever lock, brake bar, and brake blocks.

  Size Price Part Number
  Light Spring Wagon $110.00 00335
  8" Hydraulic Brake System
- fits #1 Pennsylvania Bolted Hubs		 $396.75 00057
  10" Hydraulic Brake System
- fits #1 Pennsylvania Bolted Hubs		 $541.50 00300


  Couplers

  Original style steel reproduction used to connect the hitch to the vehicle. The shaft eye width on both sizes is 1" only the coupling bolts are different. Don't forget to order axle clip bars!
Sold by the each.

  Size Price Part Number
  2 1/2" clip style $20.00 00336
  3 1/2" clip style $20.37 00337
  Plate Style for 1" axle $5.05 00115
  Plate Style for 1 1/8" axle $6.50 00116
  Bradley Coupler - Pony $71.15 00296
  Bradley Coupler Ball - Pony $20.00 00276
  Bradley Coupler Packing - Pony $1.60 00278
  Bradley Coupler - Horse $98.95 00297
  Bradley Coupler Ball - Horse $21.45 00277
  Bradley Coupler Packing - Horse $1.60 00279


  End Gate Hook Assembly

  Use on spring wagon tail gates. Original style, cast iron.
Sold by the set (4 pieces).

  Quantity Price Part Number
  Per Set $30.35 00338


  End Gate Latch

  A good copy from the original part used on a spring wagon box to hold the end gate in a closed/upright position. Spring steel strap, cast end.
Sold by the pair.

  Quantity Price Part Number
  Per Pair $21.00 003389


  Grab Handles

Picture Unavailable
  Sold by the each.

  Description Price Part Number
  Brass $30.85 00102
  $16.05 00103


  Head Block

  This fine carved hickory reproduction, made like the original part, is mounted to the top of the 5th wheel and supports the bottom of the front elliptic spring.
Specify spring width when ordering.

  Size Price Part Number
  1 1/4" Fancy $11.30 00340
  1 1/2" Fancy $11.30 00341


  Rein Rail

  Rain Rails keep the driving lines from wearing the finish off the wood dash, and add a touch of class to any vehicle. Shipped as 40" wide, cut to size required.
Sold by the each.

  Style Price Part Number
  Brass with Center Post $110.70 00342
  Chrome Surface Mount $147.00 00343
  Chrome Top Mount $147.00 00344


  Roller Rub Iron


Traditional Roller


Angled Roller


New Style Roller
  Screw or bolt this iron to the bottom outside edge of most any light vehicle, that does not cut/turn under, to protect the body from wheel damage (rubbing) when turning. Original Style, Cast iron.
Sold by the each.

  Description Price Part Number
  Traditional $9.15 00345
  New Style $16.55 00255
  Angled roller $22.70 00610


  Spring Bars

Picture Unavailable
  Sold by the each.

  Size Price Part Number
  33" $14.85 00105
  34" $17.80 00611


  Meadowbrook Riser

Picture Unavailable
  Sold by the each.

  Price Part Number
  $29.75 00104


  Side Rail Holder

  Used on Hitch Wagons to hold a side rail to the box. Bored for 1" rail.
Sold by the each.

  Size Price Part Number
  Bored for 1" rail $12.45 00346


  Springs - Full Eliptic

  These springs are specified in our Meadowbrook Cart Plans, but can be used in other applications.
Sold by the pair.

  Size Price Part Number
  1 1/2" x 36" 4-leaf $118.60 00347


  Spring Mount

  Used to securely mount body springs to the axle.
Cast steel 1 1/2" spring to 1" or 1 1/8" axle.
Sold by the each.

  Style Price Part Number
  Cast Steel $10.05 00348


  Whip Socket


Barewood


Brass
  An original styled device used to hold driving whip on a vehicle. Should be mounted on right hand side of the vehicle.

Bare Wood
Natural finish, dashboard mount, 7-1/4" long, 7/8" opening.

Brass
A cast brass whip holder, screw mount, 6-1/4" long, 1" opening.

Brass/X-Bar Mount
Cross-bar mount for carts.

  Style Price Part Number
  Bare Wood $14.50 00349
  Brass Mounting Bands for Wood Socket $1.85 00018
  Stainless Mounting Bands for Wood Socket $1.85 00017
  Stainless Dash Mount $10.85 00107
  Brass Dash Mount $9.80 00350
  Chrome Cart Mount $32.50 00106
  Brass Cart Mount $15.65 00351
  Chrome Tube Style $91.20 00089
  Brass Tube Style $79.80 00088